ARDESYA allows for writing with chalk and erasing with a dry or wet cloth, like on conventional slate blackboards. Odorless and environmentally friendly. Easy to apply by brush or spray on wood and walls.
It dries rapidly and can be written on after 24 hours. Developed by ICA Laboratories to the specifications of the most demanding wood professionals.
Walls, wood furnishings and other objects for interior.
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oils or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- A second coat of the product can be applied 1–4 hours after the first coat. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.
- Wait 24 hours before writing and erasing on the painted surface.
USE ON PREVIOUSLY FINISHED WOOD
- Sand the surface using 280–320-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- A second coat of the product can be applied 1–4 hours after the first coat. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats
ICA RECOMMENDS
- If the product is applied by spray, it should be diluted with water up to 5% by volume.
No heavy metals
Water-based
Scratch resistant
Stain resistant
Interior use
Ready to use
Roller, brush or spray application
Cleaning of equipment with water
Coverage 10-15 m2/L per coat
Can be walked on after 24h
ARDESYA allows for writing with chalk and erasing with a dry or wet cloth, like on conventional slate blackboards. Odorless and environmentally friendly. Easy to apply by brush or spray on wood and walls.
It dries rapidly and can be written on after 24 hours. Developed by ICA Laboratories to the specifications of the most demanding wood professionals.
Walls, wood furnishings and other objects for interior.
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oils or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- A second coat of the product can be applied 1–4 hours after the first coat. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.
- Wait 24 hours before writing and erasing on the painted surface.
USE ON PREVIOUSLY FINISHED WOOD
- Sand the surface using 280–320-grit sandpaper and remove the sawdust.
- Mix the product thoroughly and apply it with a brush (with synthetic bristles).
- A second coat of the product can be applied 1–4 hours after the first coat. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats
ICA RECOMMENDS
- If the product is applied by spray, it should be diluted with water up to 5% by volume.
No heavy metals
Water-based
Scratch resistant
Stain resistant
Interior use
Ready to use
Roller, brush or spray application
Cleaning of equipment with water
Coverage 10-15 m2/L per coat
Can be walked on after 24h
No heavy metals
Water-based
Scratch resistant
Stain resistant
Interior use
Ready to use
Roller, brush or spray application
Cleaning of equipment with water
Coverage 10-15 m2/L per coat
Can be walked on after 24h
