FNT high-resistance transparent top coat is the perfect finish for protecting stained wood over time.
They offer maximum protection against weathering and UV rays coupled with an excellent aesthetic effect.
Odorless and environmentally friendly. Easy to apply by brush or spray onto stained wood.
Developed by ICA laboratories to the specifications of the most demanding woodworking professionals.
Window frames, shutters, fences, balconies and other wood items located outdoors, beams and roofs.
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oily residues or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Apply the exterior wood stain of the IMG or IMGV (vintage colors) series and leave to dry.
- Mix the product thoroughly and apply it using a brush (with synthetic bristles).
- Within 2-4 hours, the second coat of product can be applied without sanding. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.
USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.
ICA RECOMMENDS
- For better wood protection, apply over our IMG exterior wood stain.
Aumenta la durata
Migliora l'estetica
Water-based
UV resistant
Weather resistant
Exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 9-12 m2/L per coat
Final drying 24h
FNT high-resistance transparent top coat is the perfect finish for protecting stained wood over time.
They offer maximum protection against weathering and UV rays coupled with an excellent aesthetic effect.
Odorless and environmentally friendly. Easy to apply by brush or spray onto stained wood.
Developed by ICA laboratories to the specifications of the most demanding woodworking professionals.
Window frames, shutters, fences, balconies and other wood items located outdoors, beams and roofs.
USE ON RAW WOOD
- The wood must be clean and dry, free of dust, oily residues or products that can limit adhesion.
- Sand the surface using 150–180-grit sandpaper and remove the sawdust.
- Apply the exterior wood stain of the IMG or IMGV (vintage colors) series and leave to dry.
- Mix the product thoroughly and apply it using a brush (with synthetic bristles).
- Within 2-4 hours, the second coat of product can be applied without sanding. After 4 hours, it is necessary to sand with 280-320 grit sandpaper to improve adhesion between coats.
USE ON PREVIOUSLY FINISHED WOOD
- Sand with 100–120-grit sandpaper until the existing coating is completely removed.
- Proceed as stated above for use on raw wood.
ICA RECOMMENDS
- For better wood protection, apply over our IMG exterior wood stain.
Aumenta la durata
Migliora l'estetica
Water-based
UV resistant
Weather resistant
Exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 9-12 m2/L per coat
Final drying 24h
Aumenta la durata
Migliora l'estetica
Water-based
UV resistant
Weather resistant
Exterior use
Ready to use
Brush or spray application
Cleaning of equipment with water
Coverage 9-12 m2/L per coat
Final drying 24h
Are you ready to enhance the natural surface of your wooden shed? The IMG series is the effective solution for total protection, even against UV rays. Organize all the space around the shed, preparing the necessary equipment and materials. We are ready to start!
New wood
